Mast Plate – EZ 32A Heavy Duty Ground Mount for Telescopic / Push Up Masts

Plate is 11 gauge steel x 9" x 9". Ez 32a ground Mount. Absolute maximum outside diameter this will accept is 2. 250". Designed to support easy up, rohn, etc telescopic push-up masts and other masts with up to 2-1/4" outside diameter. Proudly made in the usa unique design features welded guide pipe features inside diameter of 2-1/4".

Extra sturdy design. Mast is held securely in place with set screw. The pin provided allows plate to be cemeted into a concrete pad.

---

Channel Master CM-9025 3-Inch Heavy-Duty Wall Mount for TV Antenna Masts

The cm 9025 includes lag bolts and can support a mast up to 2. 5 inches in diameter. The channel master cm 9025 is a heavy duty 3 inch wall mount designed to handle large diameter masts and withstand wind forces. U-bolt with V-Block. The channel master 9025 wall mount offers heavy duty steel construction and has 3 inches of standoff from the wall to allow the antenna mast to clear roof overhang.

Channel master recommends using guy wire for all antenna installations using masts over 10 feet. Accepts mast up to 2. 5 inches in Diameter. 1 pair. Lag bolts are included. Standoff from wall: 3 inches.


Similar products

---

CHANNEL MASTER Antenna Mast Telescoping Antenna Mast 25ft CM-1830

Top diameter is 1-1/4 in. 90-day limited warranty. It comes collapsed at 9 ft. Then expands to 25-1/3 ft. And bottom diameter is 1-1/2 in. U-bolt with V-Block. Weight is 22. 5 lbs. Accepts mast up to 2. 5 inches in Diameter. 18-gauge Galvanized steel. Lag bolts are included. Standoff from wall: 3 inches. 1 pair. The channel master telescoping antenna mast 25 ft.

Is made of 18-gauge, galvanized steel. 25ft. Includes hardware.


Similar products

---

8 Inch Heavy Duty Y-Shape Antenna Wall Mounts

Includes hardware. Standoff from wall: 3 inches. 90-day limited warranty. 8 inch wall mounts set of 2 for tv, CB, Amateur Ham and Two Way Antenna Mounting. U-bolt with V-Block. Lag bolts are included. 1 pair. Includes U-Clamps and mounting bolts. 25ft. Fits optional mast pipes Up To 1. 5 inch Diameter. Includes u-Bolts and Mount Bolts.

Set of 2. 18-gauge Galvanized steel. Holds optional Mast Pipes up to 1. 5 inch diameter, 8 inches from wall. 8 inch standoff wall brackets for mounting tv, cb and Ham Radio Base Station Antennas to a Home Or Building Wall. Accepts mast up to 2. 5 inches in Diameter.


Similar products

---

National Hardware N267-013 2573BC Guy Wire - 6 Strand in Galvanized

20 gauge Guy wire. Stanley hardware 2573bc 20 gauge x 100-Feet Galvanized Guy wire - 6 strand. 8 inch standoff wall brackets for mounting tv, cb and Ham Radio Base Station Antennas to a Home Or Building Wall. Fits optional mast pipes Up To 1. 5 inch Diameter. Includes u-Bolts and Mount Bolts. Used for securing your antenna against various weather conditions.

Set of 2. Standoff from wall: 3 inches. Includes hardware. Accepts mast up to 2. 5 inches in Diameter. Easy to use and install. Lag bolts are included. 18-gauge Galvanized steel. U-bolt with V-Block. 25ft. Galvanized coating gives excellent resistance to corrosion. 90-day limited warranty. Adds stability to structures. 1 pair.

Galvanized Finish.


Similar products

---

Rohn 9H50 34' Telescopic TV Wireless Antenna Push Up Mast

Note: guys, anchors, guy hardware, and base mount are not includED. Ft. Bottom: 2-1/4"od top: 1-1/4" od / shipping length: 99" / 410" 34' actual Extended Pipe Length - Assembled Height will be around 30'. Each section extends deeper in to the lower tubes than most other Telescoping Mast designs, adding still further to the stability of the structure.

Standoff from wall: 3 inches. Set of 2. 90-day limited warranty. 8 inch standoff wall brackets for mounting tv, cb and Ham Radio Base Station Antennas to a Home Or Building Wall. U-bolt with V-Block. Weighs 34 lbs. 25ft. Erecting the telescoping mast is made by simply connecting guys and brackets to the attached unique heavy duty rolled edge guy rings and clamps, insert the locking cotter pins, extend the sections, rotating the tubes to a locked position, and tightening the clamps.

This exclusive design also prevents the sections from accidentally pulling apart and allows disassembly by pulling each section out through the lower end. Top rings are adjustable based on antenna mounting. Lag bolts are included. Pre-galvanized for corrosion protection. Ups shippable Genuine ROHN Product.


Similar products

---

Channel Master CM 1820 17' Telescoping Steel Antenna Mast

Fits optional mast pipes Up To 1. 5 inch Diameter. Includes u-Bolts and Mount Bolts. Used for securing your antenna against various weather conditions. 1 pair. Standoff from wall: 3 inches. Bottom: 2-1/4"od top: 1-1/4" od / shipping length: 99" / 410" 34' actual Extended Pipe Length - Assembled Height will be around 30'.

Section diameter & gauge: 1 1/4 - 18ga. 052, 1 1/2 - 18ga. 052. Set of 2. Comes assembled with hardware. 18-gauge Galvanized steel. Easy to use and install. Includes hardware. Top rings are adjustable based on antenna mounting. 90-day limited warranty. All sections are 18 gauge except for top which is 16 gauge. The channel master 15’ telescoping mast is a 15-foot long, 18-gauge, galvanized steel telescoping mast used for TV antenna mounting.

U-bolt with V-Block. Lag bolts are included. Pre-galvanized for corrosion protection. 25ft.


Similar products

---

Channel Master CM-1850 Electronics Antennas

25ft. Accepts mast up to 2. 5 inches in Diameter. The channel master telescoping antenna mast 40 ft. Is made of 18-gauge, galvanized steel. Includes hardware. 18 gauge steel galvanized Telescoping Mast. Ups shippable Genuine ROHN Product. 8 inch standoff wall brackets for mounting tv, cb and Ham Radio Base Station Antennas to a Home Or Building Wall.

Top rings are adjustable based on antenna mounting. And the bottom is 2-1/24 in. Note: guys, guy hardware, anchors, and base mount are not includED.17 foot length. Includes hardware. Fits optional mast pipes Up To 1. 5 inch Diameter. Includes u-Bolts and Mount Bolts. Used for securing your antenna against various weather conditions.

90-day limited warranty. All sections are 18 gauge except for top which is 16 gauge. Pre-galvanized for corrosion protection. Comes assembled with hardware.


Similar products

---

2 Pack - Channel Master 3079 Antenna Mount Kit

18-gauge Galvanized steel. Galvanized coating gives excellent resistance to corrosion. Easy to use and install. Includes hardware. Top rings are adjustable based on antenna mounting. U-bolt with V-Block. Install any masted antenna to any wall. Standoff from wall: 4 inches. 25ft. Ups shippable Genuine ROHN Product. Mounting hardware included * warranty: 90 days * Accepts mast up to 2.

5 inches in Diameter. 18 gauge steel galvanized Telescoping Mast. Pre-galvanized for corrosion protection. Warranty: 90 days. Comes assembled with hardware. 1 pair. Section diameter & gauge: 1 1/4 - 18ga. 052, 1 1/2 - 18ga. 052. Mounting hardware included. 40ft. 90-day limited warranty. Note: guys, anchors, guy hardware, and base mount are not includED.




Similar products

---

CHANNEL MASTER Antenna Mast Steel Antenna Mast 5ft CM-1805

18-gauge Galvanized steel. The outside diameter is 1-1/4 in. 18-gauge Galvanized steel. Note: guys, guy hardware, anchors, and base mount are not includED.17 foot length. Includes hardware. Pre-galvanized for corrosion protection. 90-day limited warranty. Mounting hardware included. 1 pair. 5ft. 18 gauge steel galvanized Telescoping Mast.

Set of 2. Comes assembled with hardware. Top rings are adjustable based on antenna mounting. Ups shippable Genuine ROHN Product. It has a swedged end for easy expansion. 25ft. Section diameter & gauge: 1 1/4 - 18ga. 052, 1 1/2 - 18ga. 052. Galvanized coating gives excellent resistance to corrosion. Includes hardware. Swedged end for easy Expansion.

8 inch standoff wall brackets for mounting tv, cb and Ham Radio Base Station Antennas to a Home Or Building Wall. Lag bolts are included.


Similar products

---

Channel Master CM-1850 Telescoping Steel Antenna Mast 41 FT

Includes hardware. 18-gauge Galvanized steel. Accepts mast up to 2. 5 inches in Diameter. 18 gauge steel galvanized Telescoping Mast. Lag bolts are included. 18-gauge Galvanized steel. 1 pair. 18 gauge Galvanized Steel. Set of 2. Section diameter & gauge: 1 1/4 - 18ga. 052, 1 1/2 - 18ga. 052. Note: guys, guy hardware, anchors, and base mount are not includED.

17 foot length. 90-day limited warranty. Minimum collapsable Length: 9. 0' ft. Mounting hardware included. 5ft. Pre-galvanized for corrosion protection. 8 inch standoff wall brackets for mounting tv, cb and Ham Radio Base Station Antennas to a Home Or Building Wall. Swedged end for easy Expansion. 90-day limited warranty.

25ft. Includes hardware. 40ft.


Similar products