Top 10 Mobile Phone Holder for Car Windshield – Cell Phone Automobile Cradles

As an Amazon Associate I earn from qualifying purchases.

1. VICSEED

#ad

VICSEED Car Phone Mount, Thick Case & Big Phones Friendly Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Air Vent Hands Free Clip Cell Phone Holder Compatible with All Mobile Phones

#ad
VICSEED #ad - Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry. Position your phone at the perfect angle to enjoy a more relaxed and safer drive. 3 in 1 universal car mount: vicseed car cell phone holder made with airliner ptfe material, windshield or vent to meet your demand at your convenience and requirements.

Good choice to most of the cars, suv, pickup trucks, can be universally mounted to your dashboard, trucks, taxis; good assistant for Uber, Lyft drivers. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. Vicseed upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience.

Long arm design & multiple viewing angle: the car mount for iphone 11 has a telescopic arm that extends from 4. 84" - 9. 05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. Perfect protection: say goodbye to the easy-scratched plastic panel car mount. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height1.18 Inches
Length3.94 Inches
Width3.15 Inches
Part NumberSB-304
ModelBS-BIRD9384

2. FLOVEME

#ad

Windshield Phone Car Holder Mount, FLOVEME 2020 Upgraded Gooseneck Cell Phone Holder for Car Windshield Car Phone Holder Mount Compatible with iPhone Samsung Smartphone Cell Phone Stand for Car Truck

#ad
FLOVEME #ad - Long arm gooseneck with stabilizerhigh quality aluminum material gooseneck long arm up to 12 inches, make the device closer to your sight. With long flexible arm and an Anti-shake small mount, it is easy to position and it can hold the phone stablier and safer than other car mount. One-button release, htc, wide compatibilitythis car phone mount with quick release button can be easily inserted and quick released.

Rubberized grip and adjustble foot accommodates smartphones with case, GPS from 4"-7", Sony, Samsung Galaxy, Campatible with iPhone, LG and other cellphones. Safety driving & stable designthis car phone mount stick to most surfaces firmly via a strong suction cup and locking-system and the suction cup can be cleaned and continuously used. Floveme car mount with built-in anti-slip rubber pads ensures a secure & non-scratch grip even on a bumpy road or with severe brakes.

No worry of phone falling off when driving. Optimal viewingthe cell phone car mount can be adjusted to every viewing angle as you want by rotating 360° flexible ball head and bending gooseneck arm. High quality aluminum thicker long arm ensures durability and make the device closer to your sight. Customer service and guarantee we are committed to providing customers with professional customer service. If there is any question, please feel free to contact us, the customer service team will response in 24 hours.
BrandFLOVEME #ad
ManufacturerFLOVEME #ad
Height2.95 Inches
Length5.91 Inches
Width3.94 Inches
Part NumberB088H77RCB
ModelW-3

3. Manords

#ad

Phone Holder for Car,Universal Long Neck Car Mount Holder Compatible with iPhone Xs XS Max XR X 8 8 Plus 7 7 Plus S10 S9 S8 S7 S6 LG and More

#ad
Manords #ad - Warningdue to the flexible nature of the gel, some discoloration or residue may be left depending on the type of surface that it is mounted on. Telescopic arm adjustable telescopic arm accommodates desired length up to 6.

3 inches, you can adjust the distance as your wish. How to use the suctionkeep clean where you install the phone mount. Super sticky gel padattach to windshield, dashboard or most smooth flat surfaces. 360°rotations & adjustable heightswivel ball head allows 360°free rotations to your desired viewing angle. Open the lock lever before using, press the base until there is no air gap between the base and the suction, then lock the button, rather than stick directly to the dashboard or windshield.

Note: try to avoid direct exposure to the sun. The adjustable Fixed switch helps you adjust the car mount to the perfect height. Please note, most likely will not work on leather/ vinyl dashboards. They will not fall off even in turns, bumps or when the speed too fast. The car mount can be restored to its mint condition by rinsing it with warm water and allowing it to air dry.
BrandManords #ad
ManufacturerManords #ad
Height3.15 Inches
Length4.72 Inches
Width3.94 Inches
Part NumberMJCB
ModelMJCB

4. TORRAS

#ad

Samsung Galaxy S20+Ultra S10 Note 10 Plus &All, Universal Car Phone Mount Dashboard Windshield Vent Compatible with iPhone 12 11 Pro Max XS X XR 8 SE, TORRAS Ultra-Durable Cell Phone Holder for Car

#ad
TORRAS #ad - Easy&real hands-free: release easily with one button, lg v20, samsung galaxy s20/s20+/s20 ultra 5g/note 20/10 plus/10/9 plus/9/s10/s9/a10e, clamp fast with one hand! ▶the cell phone mount holder is suitable for all kinds of mobile phones with brand thick cases, and it is exceptionally sturdy to hold your phone tightly. You will enjoy our worry-free 36-month experience and 12-hour kindly customer response! Note: The sticky pad just can be used once, you can a package including 1 enhanced suction cup, 1 support card, please think twice to stick it.

What you get: with the car holder for cell phone, 1 sticky pad, 1 strong air vent clip, and 1 user manual. You can stick it on your car dash or windshield. This is more than 10 times sturdier than ordinary ones. Also, it can be perfectly stuck on the desktop or wall when you study, video, teaching or listening. It can be reusable. 2020 enhanced vent clip: you can screw the nut to fix the clamp freely, the sturdier it will be! Its two small arms are just enough to press against the upper and lower vent blades to lighten the load on the middle one, the tighter you screw, no damage your car.

Military grade sturdiness test: the 2020 enhanced torras cell phone holder for car passed the military-grade sturdiness test, you can use it at home, it is sturdier more than 10 x than normal ones. Completely hands-free and views-adjustable. 4 in 1 ultimate car mount: are you not sure which installation method is better for your car? No worries! The 4 in1 car phone holder can be flexible placement! Dashboard & Air Vent & Windshield & Home, with low temperatures in winter and heat in summer, all places work perfectly! Also, you can choose to avoid the issue caused by environmental influences.
BrandTORRAS #ad
ManufacturerTORRAS #ad
Height4.65 Inches
Length9.08 Inches
Width2.55 Inches
Part NumberCTVK06-JP
ModelCHANG 4in1
WarrantyLifetime Warranty

5. IPOW

#ad

Long Arm Cell Phone Holder for Car with X-Shaped Clamp Fits Thick/Irregular Phone Case, IPOW Upgraded No Glue Car Phone Mount Windshield with Strong Suction

#ad
IPOW #ad - Happy purchase ensured, if you are not satisfied with it, just contact our 24-hours customer service to enjoy a good solution until you are satisfied. What’s more, it will work in hot weather, because its suction will last in high temperature while the sticky suction cup may lost stickiness and stop working.

Note: it can't be used to car dashboard. Compatible with large phones in thick/irregular protective case. The arm is long and super flexible, around 7. 6" from the ball joint to suction cup. Click 'add to cart' NOW! The non-sticky suction cup can suck to windshield/glass sturdily as sticky one does. The clamp can hold phones up to 3. 5" in width and is deep enough to fits almost all phone case includes wallet phone case, phone case with attached ring, Loopy case.

No distraction while driving. Secure holder. The four claws of the x-shaped clamp grip your phone firmly like your hands do, and they have anti-slip pad and strong spring, so your phone won’t fall out from the clamp no matter it is mounted vertically or horizontally. No glue suction cup windshield holder, can last in hot summer. Plus the 360 degree rotation ball joint you can adjust the arm to hold your phone on eye level for easy navigation.
BrandIPOW #ad
ManufacturerIPOW #ad
Part NumberIP-2018122302
Model4351536357

6. iOttie

#ad

Moto, LG, Smartphones, Nokia, Samsung, iOttie Easy One Touch 4 Dash & Windshield Car Mount Phone Holder Desk Stand Pad & Mat for iPhone, Huawei

#ad
iOttie #ad - Adjustable viewing: the newly re-designed telescopic arm extends from 4 – 6. 5 inch and pivots on 225 degree arc for a variety of optimal positions.

Strong suction: one time use dashboard disc and reusable suction cup combo offers superior stick strength. Bottom foot: foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes. Universal mounting: holds all phone and case combinations from 2. 3 inches to 3. 5 inches. Easy one touch lock/release: Patented easy one touch mechanism allows quick one hand open and close operation.
BrandiOttie #ad
ManufactureriOttie #ad
Height9 Inches
Length3 Inches
Width5 Inches
Part Number852306006596
ModelHLCRIO125
Warranty1 year

7. VICSEED

#ad

VICSEED Universal Car Phone Mount Car Phone Holder for Car Dashboard Windshield Air Vent Long Arm Strong Suction Cell Phone Car Mount Fit with iPhone SE 11 Pro X XS Max XR Galaxy S20 All Phones

#ad
VICSEED #ad - The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching. You can use this mobile phone holder for car vertically or horizontally either, pickup phone calls. You can focus on your drive, extremely flexible.

It can stay securely in the car. Release your smart phone by pressing the left bottom release button in one second. 360 degrees rotation car cell phone mount the 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. One small car mount or car vent mount feeds your different usage needs. So the car holder can stay more firmly and securely. That is convenient to navigate, VICSEED mobile phone holder will do the rest of jobs for you. Multi-function cell phone holder 3 in 1 multiple functions car phone holder, made with best airliner PTFE PC material, pickup trucks, trucks, can be mounted on dashboard windshield or air vent firmly.

Find a best view for your trip. Vicseed smartphone car mount gives you an easy and safe driving journey. One hand operation phone car mount after the easy and convenient installation, adjust the bottom leg of the mobile holder for car according to your phone size, put your phone in, lock your phone 100% tightly by squeezing the arm hard. The extra dashboard pad, provides smooth surface.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height2.8 Inches
Length5.98 Inches
Width4.61 Inches

8. Newward

#ad

Newward 2-in-1 Long Arm Windshield Dashboard Cell Phone Holder for Car Compatible with iPhone 12/12 Pro/11/Xs/XR/X/8 Plus/8/7/6, Car Phone Mount, Huawei and More, Galaxy S20/S10/S9/S9 /Note 10/S8

#ad
Newward #ad - Compatible with iphone x 8 7 7s 6 6s plus 5s 5c 5 se, google nexus 6 5, samsung galaxy S9 S8 S7 Edge S6 S5 Note 5 4, LG G5, Nokia, Moto, HTC and more. Flexible viewing angles -- full 360 degree rotation ball joint design for you to find the optimal viewing angles.

More secure and stable -- up to 13 inches of gooseneck, make the device closer to your sight. Extra dashboard support base offers more stability and security, providing stability even on bumpy roads. 2 different sizes clamps -- perfect support any device between 3. 5-6 inch and 7-8 inch diagonal.

Note: please do not pull down the car mount from windshield directly. Easy to use -- simple installation, tool-free, quick lock and release just with one button. Super-strong suction -- strong sticky gel suction cup easily adhere to windshield or most surfaces and keeps your cell phone safe and sound, yet is still easily removable.
BrandNewward #ad
ManufacturerNewward #ad
Height2.9 Inches
Length7.8 Inches
Width2.9 Inches
Part NumberNW-CM-3B
ModelLYSB019T4RBQ8-ELECTRNCS

9. IPOW

#ad

IPOW Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder with 4 Metal Plates, Soft Firm Goose Arm and Enhanced Suction Cup

#ad
IPOW #ad - Bonus 4 metal plates, powerful n45 magnets hold securely larger/heavier plus phones with protective Cases-4pcs "Nd N45 magnets"+ 2. 2" diameter large round magnetic clip surface. Phones won't vibrate in a bumpy roads/sharp turns/stop-and-go traffic. In addition, it is more convienient and hassle-free to slap your phone on than fidget it into a clamp.

Our professional customer service is always there for your until you are satisfied with the solution. Bonus 4 metal plates and protective films-you will receive 2 round+2 rectangle or 4 rectangle metal plates at random. Please use the rectangle one if your phone is big or heavy. To avoid any scratches or residues on your phone back, please stick the protective films to the front of magnet plate or the back of the phone/phone case.

Easier to position & shockproof arm-arm dimension:7. 6" long, 046" thick. It has the right amount of resistance and takes less strength to bend it to your desired angle. Strong suction cup-strong lock mechanisms inside to keep suction cup from snapping and keep the whole holder from wiggling at the base;Heat-resistant gel adhensives, no need to worry about it will melt. For any issue among the using of our product, you are warmly welcomed to contact us by e-mail.
BrandIPOW #ad
ManufacturerIPOW #ad
Height9.7 Inches
Length2.7 Inches
Width2.7 Inches
Part NumberIP1-201710180
ModelIP1-201710180
Warranty1 Year

10. APPS2Car

#ad

Universal Dashboard & Windshield Sturdy Suction Cup Car Phone Mount with Strong Sticky Gel Pad,Compatible W/ iPhone, Suction Cup Phone Holder for Windshield/Dashboard/Window, Samsung &Other Smartphone

#ad
APPS2Car #ad - You can pivot the arm up to a 240° arc, and extend the arm from 4. 6" to 6. 3". Broad compatibility: this phone car holder, moto g z x, with its rubber coated grips for enhanced stability and protection, google pixel 3 3xl, nokia 8 7 6, a9 a8+ a8 a7 pro c8 c7 c5, this car phone mount can hold iphone XS Max XR X 8 Plus 7 6S 6 5S SE, nexus 5 5x 6p, Oneplus 6T 6 5T, note 9 8 6 5, thanks to specialized grips that expand up to 4" wide, sony xperia xa2 xa1 xz1 z5 z4, Samsung Galaxy S10 S10+ S10e S9 S9+ S8+ S8 S7 Edge S6 S5, lg v35 v30 v20, HTC Nokia etc.

Industrial-strength suction cup windshield/dashboard phone holder: paired with APPS2Car's industry leading suction-cup technology, with a coating of sticky gel for seriously secure mounting on your windshield. Full range of motion: the cradle holder rotates 360°, enabling you to view your device in portrait or landscape orientation. Quick-release button for easy phone access: this hands-free car phone mount with the One-click release button design, you can just press the button on the back of the holder to release the two sides grips, then snap device into place, your phone is good and secure.

Note: clean and dry the mounting surface with the cloth before installation. The car phone mount holder has a pivoting and telescopic arm that helps you position your phone in the optimum position. This product includes an extra 3M sticky dashboard pad for a stronger hold in the case of dash placement. Easy to place and remove your smartphones with just one hand. Even with case on device.
BrandAPPS2Car #ad
ManufacturerWiiki-Tech #ad
Part NumberH4-S02
ModelH4-S02