As an Amazon Associate I earn from qualifying purchases.
Qifutan #ad - Make your operation more fluently. It sticks securely and easily on the windshield or most flat surfaces and removes the phone car mount without leaving any nasty marks. Broad vision: qifutan cell phone car mount features a 16cm/6. 2in aluminum long gooseneck that sends your phone much closer to you.
Fit well for the smartphone which’s the width between 4''-7''in and the most thickness. It can be mounted on the windshield firmly. Note: the car mount need a big enough flat surface to make the adhesive attached closely and completeLY. Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle.
Most importantly, you can bend it in every direction to avoid obstructing the view. You can enjoy a more convenient and secure drive. Note: not recommended to use the extra dashboard pad for windshield mountiNG. Smooth contact: the car phone mount is padded with multiple soft silicone pads to avoid scratching your smartphone or other devices. One-hand operation: press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand.
iOttie #ad - Mount or remove your phone in seconds with the patented Easy One Touch Mechanism. Telescopic arm: the improved telescopic arm now extends from 5 inches to 8 inches as opposed to the Easy One Touch 4 which only extended to 6.
5inch and pivots 260 degrees. The mount’s arms will close automatically, holding your device securely while you drive. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button.
Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size. Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button.
CINDRO #ad - Secure grip & never fall off: the phone mount for car is armed with an innovative hollow silicone rubber. Whenever and wherever, the phone holder for car vent can secure your driving safety. It can hold your phone more tightly than other silicone arm clips, you can rollover your phone at will, it will not move at all.
Note: this phone mount only can hook on horizontal air vent but it cannot be used on vertical or round air vENT. Broad applicability: the ultra-wide adjustable arm design will make the car phone holder suitable for all mobile phones 4.
The quick release button and adjustable clamp arm make it very easy to sheathe and remove your phone just with one hand. Easy to install: clamp the car vent phone mount on the vent and rotate the handle lock ring. Firmly clip: the car phone holder mount has an adjustable handle lock clasp, which can easily and firmly fix the vent mounting clip to the car vent.
vanva #ad - Screw the clamp and the rubber clip hook will catch one of the car air vent blades tightly, even if you hit a bump or a sharper turn. Fit universally & get 24 months worry free warranty with our car phone mount, lg, include iphone 13/ 13 pro / xr / note 9/note 8/ s7 / 13 pro max/ 12/12 pro/12 pro max/12 mini/se/ 11 /11 pro /11 pro max /xs / 6 / 7 / 6s / 8 / 7 plus / 6 plus / 8 Plus / s9 / S6 S6 Edge / xs max / s8 / s7 edge / s10+ / s10e / s5 / x / 5, you'll enjoy 24 months warranty.
With all above these, even can stable support big phones and thick cases. Hold your phone stably & drive without distracting vanva phone mount holder has anti-slip rubber pads, the stability increase 5 times, stable support shelf, firm & scratch-free claw offer secure grip for your cellphone to ensure safer driving.
This cell phone car mount is fit for almost all phones, samsung galaxy S10 / SE / S9+ / S8+ /Note 10+ /Note 10 / 5s / S4, Google Pixel etc. After take few seconds to install it well, which won't distract you from driving. Screw the vent clamp tightly & secure stable install vanva car phone mount adopts 2021 latest screw mechanial lock design which holds your phone securely to the vent. This air vent car mount allow you secure your smartphone to the air vent firmly, your phone can be rotated easily to landscape and poraits as well as anywhere in between, keeping it in place whilst the optimal viewing angle.
HHJ #ad - Sleek phone mount for your beloved car. Securely stable for most vents: with the extended vent clip, easy to hook the car phone holder on most AC vents by rotating the knob. Adjustable as you wish: flexible adjustment makes this cell phone automobile cradle Versatile - Adjustable Bottom Foot to fit for all phones + Release Button behind to offer a more convenience operation + 360° Rotation Ball Joint to turn from portrait to landscape mode as your preference.
Super easy to install: have the phone holder connected to the universal air vent clip, the total installation takes 5s only, that is it! No need to waste your good time to study the complex instruction.
Thick case and big phone friendly: pulled out the adjustable feet, the car phone holder fits all mainstream smartphones like iPhone, SAMSUNG, what’s more, Google Pixel, it works for phone with thick cases like otter case. Truly durable & perfect protection: the surface of the car mount for iphone is fully protected by silicone, provides securely grip power and protects your costful phone from wear and tear.
DesertWest #ad - The phone holder will stay in the car stable, even if turning, or driving on bumpy road. It also features a one-button release system that enables you to lock or release your phone with just one hand operation. Multiple viewing angle: adjustable ball joint allows 360°rotation for optimal viewing angles of your device. Adjustable telescopic arm accommodates desired length up to 9.
84 inches 24. 9cm, you can adjust the distance as you wish. Enjoy a safer and more relaxed driving experience while position your phone at the perfect angle. Thick case friendly: the phone holder for car compatible with all smartphones and thick case, such as iphone 13 pro / 10 / iphone 12 mini / 7 / iphone 13 pro max / 6 / xs max / iphone 12 / s9 plus / 8 plus / s8 / s9 / iPhone 12 Pro / S20 / iphone 11 pro max / XR / s10e / x / iPhone 13 / iPhone 12 Pro Max / S10 Plus / iPhone 11 / iphone 13 Mini / s10 / 6s / 8 / iPhone 11 Pro / 7 Plus, Samsung Galaxy Note 20 / iphone se / S8 Plus, etc, .
Your device will stay secure on the phone holder without any scratching of the vent blades. Military grade sturdiness: we greatly improved our car phone holder mount to the best version ever based on feedback from over 8, 000, 000 customers. With the strong clamping force which is up to 52 lbs Equivalent to a dozen of iPhone 13, it is 20 times sturdier than normal ones. Hands free & full protection: release easily with one button, flying out, clamp fast with one hand! adopt Shock-absorbing faux carbon fiber on this car cell phone holder, more fitting solid silicone rubber on the 2-side clamps & holding feet to effectively avoid bumping, scratching, and abnormal noise on your cell phone at all times.
LISEN #ad - Quality is strictly controlled. Convincing quality & universal compatibility: lisen car phone holder won sgs rohs & sgs cp65 official certification and passed the magnetic force, note 9 / XR / Mini 3 / 8/7/6/5, iPad Air 2 / X / Galaxy Note20 U, s21 s20 s10 s9 s8 s7 s6, telephone signal, hook stability and ingredient safety test.
It is recommend that use the “square pad” on the back of your phone/case. The car holder holds most smartphones and mini tablets compatible with iPhone 13 12 11 pro max / Pro 9.
Any device needs to use the metal palte even iphone 12 and iPhone13. Please note：1. Easy installation: benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. 2.
Loncaster #ad - Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn.
Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, ipad, pixel, htc, nexus, samsung galaxy note 8 /9/10 /10 pro/20 ultra, S 7 Edge, Mi, S 20 plus/ 8 plus / 9 plus /10 plus, LG, Huawei, Sony, S20/S 8 /9 /10, Garmin and so on.
Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Just rinse with water and dry it, it will be the same as the new one. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
AINOPE #ad - This phone holder only compatible with horitable air vent. No block vent & safer driving: this car vent phone mount with folding back structure is very neat and keep it small when not in use, only 1/2 card size and 3 inches away from the vent to still allow air flow.
Auto lock, no more fall :this gravity slide-in car phone holder creatively features the auto-lock arm-slots that stretch on the side can auto adjust to hold phone more firmly without fears of bumps, Special curve of arms fit phone better.
The easiest operation & just slide in and go: just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation and a strong stable hold without button to press. Note: the length of clamp betweeN 041-098in. Note: the horizontal mode is not supporTED. The phone was all-round protected by silicone rubber on the inside clamps. Note:maximum thickness of device is 14mM 0
Miracase #ad - Provide you with safer driving whether you are talking, listening to music or charging. Great compatibilitymiracase air vent phone holder cradle is compatible with all cell phones and devices between 2. 1-4. 05 inches widesuch as thicker phone cases, navigation and more.
The spring clip plate and the tightening nut will provide absolute fixation. It will never fall out like other products no matter how bumpy the road is. The clip hook will catch one of car air vent blades.
Never fall off-classic series designmiracase car phone mount adopts latest locking design. Professional supportplease feel free to contact us in the first time for any product issues, a satisfied solution is promised forever. 360 degree rotationthe 360-degree rotatable head will provide you with the best viewing angle to keep secure driving.
1. Qifutan
#adCell Phone Holder for Car Phone Mount Long Arm Dashboard Windshield Car Phone Holder Strong Suction Anti-Shake Stabilizer Phone Car Holder Compatible with All Phone Android Smartphone
#adFit well for the smartphone which’s the width between 4''-7''in and the most thickness. It can be mounted on the windshield firmly. Note: the car mount need a big enough flat surface to make the adhesive attached closely and completeLY. Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle.
More information #ad
Perfect choice for most cars, sUVs, vehicle, pickup trucks, trucks, taxis; a good assistant for Uber, Lyft drivers. Most importantly, you can bend it in every direction to avoid obstructing the view. You can enjoy a more convenient and secure drive. Note: not recommended to use the extra dashboard pad for windshield mountiNG. Smooth contact: the car phone mount is padded with multiple soft silicone pads to avoid scratching your smartphone or other devices. One-hand operation: press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand.
| Brand | Qifutan #ad |
| Manufacturer | Qifutan #ad |
| Part Number | HD-C77 |
| Model | HD-C77 |
More information #ad
2. iOttie
#adIOttie Easy One Touch 5 Dashboard & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, Nokia, Smartphones, Samsung, Moto, LG, Huawei
#ad5inch and pivots 260 degrees. The mount’s arms will close automatically, holding your device securely while you drive. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button.
More information #ad
This enables a myriad of customized viewing angles while you’re on the road. Magnetic cord organizer: Keep charging cables neatly organized with the magnetic tab located near the bottom foot. Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size. Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button.
| Brand | iOttie #ad |
| Manufacturer | iOttie #ad |
| Height | 4 Inches |
| Length | 6.5 Inches |
| Weight | 0.45 Pounds |
| Width | 4.2 Inches |
| Part Number | HLCRIO171AM |
| Model | One Touch 5 |
| Warranty | 2 year manufacturer |
More information #ad
3. CINDRO
#adPhone Holder Car Upgrade Clip Never Fall Car Phone Holder Mount Automobile Air Vent Hands Free Cell Phone Holder for Car Fit for All Car Mount for iPhone Android Smartphone
#adNote: this phone mount only can hook on horizontal air vent but it cannot be used on vertical or round air vENT. Broad applicability: the ultra-wide adjustable arm design will make the car phone holder suitable for all mobile phones 4.
More information #ad
0-7. 2 inches, thin cases and other devices width between 2. 55-4. 11 inches, such as GPS devices. Adjustable as your wish: with the 360° rotating and rotating ball joint, the iphone holder for car can be easily adjusted to the best viewing angle. The quick release button and adjustable clamp arm make it very easy to sheathe and remove your phone just with one hand. Easy to install: clamp the car vent phone mount on the vent and rotate the handle lock ring. Firmly clip: the car phone holder mount has an adjustable handle lock clasp, which can easily and firmly fix the vent mounting clip to the car vent.
| Brand | CINDRO #ad |
| Manufacturer | CINDRO #ad |
More information #ad
4. vanva
#adBig Phones & Thick Case Friendly Cell Phone Holder for Car Hands Free Clamp Cradle Vehicle Compatible with All Apple iPhone, vanva Military-Grade Protection Universal Air Vent Car Mount
#adWith all above these, even can stable support big phones and thick cases. Hold your phone stably & drive without distracting vanva phone mount holder has anti-slip rubber pads, the stability increase 5 times, stable support shelf, firm & scratch-free claw offer secure grip for your cellphone to ensure safer driving.
More information #ad
This phone car holder is made from the most advanced durable sturdy aviation-grade materials, making it more resistant to abrasion and corrosion. Vanva ultimate car phone holder with the latest improved vent clip don't slip & drop, it is the first phone mount car to pass most extreme test on the market, this car phone holder could hold your phone firmly even on the bumpiest road or sharper turn. This cell phone car mount is fit for almost all phones, samsung galaxy S10 / SE / S9+ / S8+ /Note 10+ /Note 10 / 5s / S4, Google Pixel etc. After take few seconds to install it well, which won't distract you from driving. Screw the vent clamp tightly & secure stable install vanva car phone mount adopts 2021 latest screw mechanial lock design which holds your phone securely to the vent. This air vent car mount allow you secure your smartphone to the air vent firmly, your phone can be rotated easily to landscape and poraits as well as anywhere in between, keeping it in place whilst the optimal viewing angle.
| Brand | vanva #ad |
| Manufacturer | vanva #ad |
| Height | 2.17 Inches |
| Length | 4.53 Inches |
| Width | 2.56 Inches |
More information #ad
5. HHJ
#adPhone Mount for Car Super Stable & Easy Upgraded Air Vent Clip Car Phone Holder Mount Fit for All Cell Phone with Thick Case Handsfree Car Mount for iPhone Cell Phone Automobile Cradles Universal
#adSuper easy to install: have the phone holder connected to the universal air vent clip, the total installation takes 5s only, that is it! No need to waste your good time to study the complex instruction.
More information #ad
The car phone holder mount will stay in place even if you hit a bump or a sharp turn, which ensures a distraction-free road trip. Thick case and big phone friendly: pulled out the adjustable feet, the car phone holder fits all mainstream smartphones like iPhone, SAMSUNG, what’s more, Google Pixel, it works for phone with thick cases like otter case. Truly durable & perfect protection: the surface of the car mount for iphone is fully protected by silicone, provides securely grip power and protects your costful phone from wear and tear.
| Brand | HHJ #ad |
| Manufacturer | HHJ #ad |
| Part Number | HD-C58-A |
| Model | HD-C58-A |
| Warranty | 2 year |
More information #ad
6. DesertWest
#adDesertWest Car Phone Holder Mount, Military Grade Cell Phone Holder for Car Dashboard Windshield Air Vent Compatible with iPhone 13 Pro Max 12 11 X XS XR 8 7, Samsung Galaxy S21 S20 S10+ All Phones
#ad84 inches 24. 9cm, you can adjust the distance as you wish. Enjoy a safer and more relaxed driving experience while position your phone at the perfect angle. Thick case friendly: the phone holder for car compatible with all smartphones and thick case, such as iphone 13 pro / 10 / iphone 12 mini / 7 / iphone 13 pro max / 6 / xs max / iphone 12 / s9 plus / 8 plus / s8 / s9 / iPhone 12 Pro / S20 / iphone 11 pro max / XR / s10e / x / iPhone 13 / iPhone 12 Pro Max / S10 Plus / iPhone 11 / iphone 13 Mini / s10 / 6s / 8 / iPhone 11 Pro / 7 Plus, Samsung Galaxy Note 20 / iphone se / S8 Plus, etc, .
More information #ad
Extra strong suction cup with super sticky gel pad sticks tightly on your dashboard or most flat surfaces. Your device will stay secure on the phone holder without any scratching of the vent blades. Military grade sturdiness: we greatly improved our car phone holder mount to the best version ever based on feedback from over 8, 000, 000 customers. With the strong clamping force which is up to 52 lbs Equivalent to a dozen of iPhone 13, it is 20 times sturdier than normal ones. Hands free & full protection: release easily with one button, flying out, clamp fast with one hand! adopt Shock-absorbing faux carbon fiber on this car cell phone holder, more fitting solid silicone rubber on the 2-side clamps & holding feet to effectively avoid bumping, scratching, and abnormal noise on your cell phone at all times.
| Brand | DesertWest #ad |
| Manufacturer | DesertWest #ad |
| Part Number | Z3-8YK7-CPN5 |
| Model | Z3-8YK7-CPN5 |
More information #ad
7. LISEN
#adEasily Install Magnetic Phone Car Mount 6 Strong Magnets Cell Phone Holder for Car Case Friendly iPhone Car Holder Compatible with All Smartphones & Tablets, LISEN Car Phone Holder Mount
#adIt is recommend that use the “square pad” on the back of your phone/case. The car holder holds most smartphones and mini tablets compatible with iPhone 13 12 11 pro max / Pro 9.
More information #ad
7 and more. This product cannot work with MagSafe. Then finish the installation. It is more stable than the round. Upgraded clip: this car phone holder mount is designed as “hook shape” and form “three grasp points” which can vise the outlet blades tightly and ensure it never fall off in any situation. Any device needs to use the metal palte even iphone 12 and iPhone13. Please note：1. Easy installation: benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. 2.
| Brand | LISEN #ad |
| Manufacturer | LISEN #ad |
| Height | 2.56 Inches |
| Length | 1.93 Inches |
| Weight | 0.11 Pounds |
| Width | 1.42 Inches |
| Part Number | LV633-Black |
| Model | LV633 |
| Warranty | one year |
More information #ad
8. Loncaster
#adGPS Devices and More, Android Smartphones, Loncaster Car Phone Holder, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, Slip Free Desk Phone Stand Compatible with iPhone, Black, Samsung
#adWashable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, ipad, pixel, htc, nexus, samsung galaxy note 8 /9/10 /10 pro/20 ultra, S 7 Edge, Mi, S 20 plus/ 8 plus / 9 plus /10 plus, LG, Huawei, Sony, S20/S 8 /9 /10, Garmin and so on.
More information #ad
Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Just rinse with water and dry it, it will be the same as the new one. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
| Brand | Loncaster #ad |
| Manufacturer | Loncaster #ad |
| Height | 1.8 Inches |
| Length | 4.8 Inches |
| Weight | 0.37 Pounds |
| Width | 4.8 Inches |
| Part Number | yx-40 |
| Model | 40 |
More information #ad
9. AINOPE
#ad2022 Upgraded Gravity Phone Holder for Car Vent with Upgraded Hook Clip Auto Lock Hands Free Air Vent Cell Phone Car Mount Compatible with 4-7 inch Smartphone, AINOPE Car Phone Holder Mount
#adAuto lock, no more fall :this gravity slide-in car phone holder creatively features the auto-lock arm-slots that stretch on the side can auto adjust to hold phone more firmly without fears of bumps, Special curve of arms fit phone better.
More information #ad
Note:we recommend using the smaller phone＜4. 7inch with phone CASE. It solving the market's common problem of falling forward and off the air vent constantly when going over bumps or turns. The easiest operation & just slide in and go: just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation and a strong stable hold without button to press. Note: the length of clamp betweeN 041-098in. Note: the horizontal mode is not supporTED. The phone was all-round protected by silicone rubber on the inside clamps. Note:maximum thickness of device is 14mM 0
| Brand | AINOPE #ad |
| Manufacturer | AINOPE #ad |
| Height | 1.3 Inches |
| Length | 3.92 Inches |
| Width | 4.49 Inches |
| Part Number | AV640 |
| Model | AV640-BLACK |
More information #ad
10. Miracase
#adAir Vent Phone Holder for Car,Miracase Vehicle Cell Phone Mount Cradle with Adjustable Clip Compatible with iPhone 13 Series/iPhone 12 Series/11 /11 Pro Max/XR/Samsung and More
#adThe spring clip plate and the tightening nut will provide absolute fixation. It will never fall out like other products no matter how bumpy the road is. The clip hook will catch one of car air vent blades.
More information #ad
You can place your phone in any orientationhorizontal, vertical and more, Just enjoy the best drving experience. One-hand operationwith quick release button and adjustable clamp arms, navigating, Miracase car phone mount makes it very easy to insert and remove your phone with single hand. Never fall off-classic series designmiracase car phone mount adopts latest locking design. Professional supportplease feel free to contact us in the first time for any product issues, a satisfied solution is promised forever. 360 degree rotationthe 360-degree rotatable head will provide you with the best viewing angle to keep secure driving.
| Brand | Miracase #ad |
| Manufacturer | Miracase #ad |
| Height | 2.36 Inches |
| Length | 4.72 Inches |
| Weight | 0.04 Pounds |
| Width | 3.15 Inches |
| Part Number | C-2 |
| Model | Car Vent Phone Holder-CA01 |
More information #ad
