Signal Generator DIY Kit, KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency

#ad
#ad
KKmoon MP26174598 #ad - If you find other merchants selling our exclusive brand, it is a counterfeit product, please don't be fooled and contact us in time. It's a diy kit for you to weld and install. Specifications voltage supply: 9-12v dc input waveforms: square, sine & triangle impedance: 600 ohm + 10% Frequency: 1Hz-1MHz SINE WAVE Amplitude: 0-3V at 9V DC Input Distortion: Less than 1% at 1KHz Flatness: +0

05db 1hz - 100khz square wave amplitude: 8v no load at 9v dc input rise time: less than 50ns at 1khz fall time: less than 30ns at 1khz symmetry: less than 5% at 1KHz TRIANGLE WAVE Amplitude: 0-3V at 9V DC Input Linearity: Less than 1% up to 100KHz 10mA Package Size: Approx. This signal generator DIY kit is professional product to generate sine/triangle/square wave.

Signal Generator DIY Kit, KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency #ad - 12 * 8 * 2cm / 4. 72 * 3. 15 * 08in package weight: 69g / 2. 46ozwhat is in the box 1 * signal generator DIY Kit 1 * User ManualEnglish High resolution, can generate sine/triangle/square waveforms. Frequency range: 1Hz-1MHz. Adjustable frequency and amplitude. Frequency adjustment features coarse tuning and fine tuning.

All are through hole components, easy for installation.

More information about KKmoon MP26174598 #ad

kuman 3O-IUX5-O0TZ DSO 138 DIY Kit Open Source 2.4" TFT 1MSPS Digital Oscilloscope Kit with DIY Parts + Probe 13803K

#ad
#ad
kuman #ad - Dso138 2. 4" tft 1msps digital oscilloscope kit for DIY it's easy to solder. Oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly. The latter serves also as a SMD soldering training kit. The other is with only the main ic the mcu pre-soldered PN: 13804K, replacing 13802K.

Detailed assembly instructions are provided in combination with troubleshooting guide and schematc. One is with all smd parts pre-soldered PN: 13803K, replacing 13801K. This opens the possibility for users to add different features or develop new applications on the hardware. Dso138 oscilloscope diy kit major features: analog bandwidth: 0 - 200Khz sampling rate: 1Msps Max sensitivity: 10mV/div - 5V/div sensitivity error: features DSO138 kits are sold in two configurations.

kuman 3O-IUX5-O0TZ DSO 138 DIY Kit Open Source 2.4" TFT 1MSPS Digital Oscilloscope Kit with DIY Parts + Probe 13803K #ad - For both configurations The mcu has been pre-programmed and no re-programming required. It uses 2. 4-inch tft lcd 320 x 240 dot-matrix, 262K colors as its display element and displays nice. Kuman jye dso138 is partially open-sourced.

More information about kuman #ad


Similar products



5pack 9v Battery Clip with 2.1mm X 5.5mm Male DC Plug for Arduino by Corpco

#ad
#ad
Corporate Computer Corpco-x-9vsnap-5pk #ad - Cable length:6 inches. Our battery adapters are covered by a 90 day warranty. Great to use for LED strip light or arduino. Arduino and Battery shown for example only. Standard 2. 1mm x 5. 5mm center positive male plug connects directly to the Arduino board. Simplicity in structure and easiness in assembly. It uses 2.

5pack 9v Battery Clip with 2.1mm X 5.5mm Male DC Plug for Arduino by Corpco #ad - 4-inch tft lcd 320 x 240 dot-matrix, 262K colors as its display element and displays nice. Make your arduino projects portable with these 9V battery snaps powering your project. Dso138 2. 4" tft 1msps digital oscilloscope kit for DIY it's easy to solder. Oscilloscope functions with no fancy features. Detailed assembly instructions are provided in combination with troubleshooting guide and schematc.

Plug type: 2. 1mm x 5. 5mm male to 9V Battery Clip. Package contains 5 pcs 9v Battery Clips 9V battery is not included.

More information about Corporate Computer Corpco-x-9vsnap-5pk #ad


Similar products



Multifunction Meter DIY kit, kuman Mega 328 Graphic transistor Tester, NPN PNP Diodes Triode Capacitor ESR SCR MOSFET Resistor Inductance LCD Display Checker with case and screwdriver K77

#ad
#ad
Kuman K77-UK #ad - Great to use for LED strip light or arduino. Cable length:6 inches. It uses 2. 4-inch tft lcd 320 x 240 dot-matrix, 262K colors as its display element and displays nice. Test ranges: inductors, scr, transistor, the regulator, diodes, led tube, mos, dual diode, ESR, Resistance, capacitors, Adjustable potentiometer Power Consumption Off Mode: Less than 20nA Capacitor Measure Range: 25pf -100000uf Inductance Measure Range: 0.

01mh-20h resistance Measure Range: 01ohm resolution, maximum 50m ohm Power: 9V battery If longer power, you can use pack consisting of two 8. 4v lithium battery lcd :128*64 lcd display Color: Green, Yellow PCB Size: 2. 86x2. 37x0047inch l*w*t weight: 45g package content: 1 x Transistor Tester 1 x Acrylic shell 1 x screwdriver Dso138 2.

Multifunction Meter DIY kit, kuman Mega 328 Graphic transistor Tester, NPN PNP Diodes Triode Capacitor ESR SCR MOSFET Resistor Inductance LCD Display Checker with case and screwdriver K77 #ad - 4" tft 1msps digital oscilloscope kit for DIY it's easy to solder. Oscilloscope functions with no fancy features. Arduino and Battery shown for example only. Kuman graphic multifunction tester: resistor + capacitor + diode + SCR + inductance + Transistor + mos tube. Automatic detect npn and pnp transistors, diode including dual diodes, N-channel and P-channel MOSFET, capacitors, resistors, transistors, thyristors and other components.

With function of automatic power off, can save unnecessary time and battery capacity, Automatic test the pin element and the display on the 12864 LCD Display.

More information about Kuman K77-UK #ad


Similar products



Kuman JYE Tech DSO Shell Oscilloscope DIY Kit with Open Source 2.4 inch Color TFT LCD+ Shell + DIY Parts + Probe 15001K SMD pre-soldered

#ad
#ad
Kuman 15001K-US #ad - This brings in better separation between analog and digital circuits. Kuman graphic multifunction tester: resistor + capacitor + diode + SCR + inductance + Transistor + mos tube. Automatic detect npn and pnp transistors, N-channel and P-channel MOSFET, diode including dual diodes, resistors, capacitors, transistors, thyristors and other components.

With function of automatic power off, can save unnecessary time and battery capacity, Automatic test the pin element and the display on the 12864 LCD Display. Package content: 1 x Transistor Tester 1 x Acrylic shell 1 x screwdriver. Detailed assembly instructions are provided in combination with troubleshooting guide and schematc.

Kuman JYE Tech DSO Shell Oscilloscope DIY Kit with Open Source 2.4 inch Color TFT LCD+ Shell + DIY Parts + Probe 15001K SMD pre-soldered #ad - Plug type: 2. 1mm x 5. 5mm male to 9V Battery Clip. Rotary encoder has been added. The front panel and top/bottom brackets are flexible for easy user modification. Detailed assembly instructions are provided in combination with troubleshooting guide and schematic. It makes parameter adjustment much quicker and easier.

Simplicity in structure and easiness in assembly.

More information about Kuman 15001K-US #ad


Similar products



Aven 17010 Adjustable Circuit Board Holder

#ad
#ad
Aven 17010 #ad - Update from kuman 13803k: the sensitivity of dso shell has been extended in both directions and is higher and wider than DSO138. Ideal for clamping PCB, for soldering/desoldering or rework. It makes parameter adjustment much quicker and easier. Detailed assembly instructions are provided in combination with troubleshooting guide and schematc.

Plug type: 2. 1mm x 5. 5mm male to 9V Battery Clip. The base of this rigid metal stand features four rubber feet to ensure stability. The adjustable circuit Board Holder is ideal for clamping PCB for soldering, desoldering or rework. It features 2 adjustable grips on a retractable stand to accommodate various board sizes up to 198mm wide and up to 4mm thick.

Aven 17010 Adjustable Circuit Board Holder #ad - Without the analog portion the mainboard can be used in many other applications. Package contains 5 pcs 9v Battery Clips 9V battery is not included. It reaches 5mv/div - 20v/div while DSO138 is only 10mV/div - 5V/div. The front panel and top/bottom brackets are flexible for easy user modification. Rubber feet of the base ensure stability.

Clamps allow PCB to rotate 360 degrees. Kuman graphic multifunction tester: resistor + capacitor + diode + SCR + inductance + Transistor + mos tube.

More information about Aven 17010 #ad


Similar products



Smartcoco DIY Case Shell Diy DSO138 Oscilloscope oscilloscope Kit Cover for Parts Cover Oscilloscope Accessories

#ad
#ad
Smartcoco #ad - It reaches 5mv/div - 20v/div while DSO138 is only 10mV/div - 5V/div. Easy assembly of electronic enthusiasts. Material: acrylic. Package contains 5 pcs 9v Battery Clips 9V battery is not included. Cable length:6 inches. The front panel and top/bottom brackets are flexible for easy user modification. Rigid metal structure.

Arduino and Battery shown for example only. Without the analog portion the mainboard can be used in many other applications. Clamps allow PCB to rotate 360 degrees. Great to use for LED strip light or arduino. Detailed assembly instructions are provided in combination with troubleshooting guide and schematc. Plug type: 2.

Smartcoco DIY Case Shell Diy DSO138 Oscilloscope oscilloscope Kit Cover for Parts Cover Oscilloscope Accessories #ad - 1mm x 5. 5mm male to 9V Battery Clip. Detailed assembly instructions are provided in combination with troubleshooting guide and schematic. Easy assembly of electronic enthusiasts. Update from kuman 13803k: the sensitivity of dso shell has been extended in both directions and is higher and wider than DSO138. It uses 2.

4-inch tft lcd 320 x 240 dot-matrix, 262K colors as its display element and displays nice.

More information about Smartcoco #ad


Similar products



BlastCase US Plug 110V DIY Lm317 Adjustable Voltage Power Supply Board Kit with Case

#ad
#ad
BlastCase FBA_SKU187857-KCT #ad - More applications: display and mcu are now mounted on the same board mainboard to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. The front panel and top/bottom brackets are flexible for easy user modification. Detailed assembly instructions are provided in combination with troubleshooting guide and schematc.

Plug type: 2. 1mm x 5. 5mm male to 9V Battery Clip. It makes parameter adjustment much quicker and easier. Kuman graphic multifunction tester: resistor + capacitor + diode + SCR + inductance + Transistor + mos tube. Automatic detect npn and pnp transistors, capacitors, transistors, resistors, diode including dual diodes, N-channel and P-channel MOSFET, thyristors and other components.

BlastCase US Plug 110V DIY Lm317 Adjustable Voltage Power Supply Board Kit with Case #ad - With function of automatic power off, can save unnecessary time and battery capacity, Automatic test the pin element and the display on the 12864 LCD Display. Package content: 1 x Transistor Tester 1 x Acrylic shell 1 x screwdriver. Clamps allow PCB to rotate 360 degrees. Without the analog portion the mainboard can be used in many other applications.

Cover for Diy dso138 oscilloscope. Acrylic material looks transparent film to demolish the need.

More information about BlastCase FBA_SKU187857-KCT #ad


Similar products



JYETech 'DSO Shell' Oscilloscope DIY Kit w/Enclosure, 100MHz Probe, Clip Probe & ESD-Safe Silicone Mat

#ad
#ad
NooElec Inc. DSO Shell Bundle #ad - It makes parameter adjustment much quicker and easier. Rubber feet of the base ensure stability. One major difference is the DSO Shell comes with a full molded plastic enclosure. A rotary encoder has also been added to make parameter adjustment quick and painless. Rotary encoder has been added. Without the analog portion the mainboard can be used in many other applications.

Detailed assembly instructions are provided in combination with troubleshooting guide and schematic. Dso shell comes with full enclosure. Ideal for clamping PCB, for soldering/desoldering or rework. It is also factory-tested before shipment to ensure your kit will function as expected. Clamps allow PCB to rotate 360 degrees.

JYETech 'DSO Shell' Oscilloscope DIY Kit w/Enclosure, 100MHz Probe, Clip Probe & ESD-Safe Silicone Mat #ad - It reaches 5mv/div - 20v/div while DSO138 is only 10mV/div - 5V/div. Included: ✔ oscilloscope circuit boards and parts kit ✔ oscilloscope enclosure ✔ 100MHz oscilloscope probe with 1x/10x feature ✔ Alligator clip oscilloscope probe ✔ ESD-safe, temperature-safe silicone soldering mat ✔ Printed assembly instructions, troubleshooting guide and schematic Build your own functional oscilloscope for your bench.

The front panel and top/bottom brackets are flexible for easy user modification. How cool is that?? dso shell dso 150 has similar bandwidth as the popular DSO 138 kit, but contains significant improvements to the structure, assembly, and operation. Important: 9V DC input power is required.

More information about NooElec Inc. DSO Shell Bundle #ad


Similar products



Longruner DSO138 Open Source 2.4" TFT Digital Oscilloscope Kit 1Msps with Probe Assembled Vision Welded Open Source

#ad
#ad
Longruner 13805K #ad - Simplicity in structure and easiness in assembly/operation are among the main targets of the design. Detailed assembly instructions are provided in combination with troubleshooting guide and schematic. More applications: display and mcu are now mounted on the same board mainboard to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts.

Longruner DSO138 Open Source 2.4" TFT Digital Oscilloscope Kit 1Msps with Probe Assembled Vision Welded Open Source #ad - The longruner dso138 is full assembled, not DIY KIT! It contains only the basic oscilloscope functions with no fancy features. Dso shell comes with full enclosure. Easy assembly of electronic enthusiasts. Material: acrylic. Service Email: [email protected] Com dso138 2. 4" tft 1msps digital oscilloscope kit for DIY it's easy to solder.

Oscilloscope functions with no fancy features. Clamps allow PCB to rotate 360 degrees. Build your own color oscilloscope! Basic through-hole soldering skills are required surface mount parts are pre-soldered to PCB. This brings in better separation between analog and digital circuits. It uses 2.

More information about Longruner 13805K #ad


Similar products



Quimat Updated DSO Shell 2.4” TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 Assembled Finished Machine

#ad
#ad
Quimat #ad - Arduino and Battery shown for example only. Specification:  number of channel: 1  analog bandwidth: 0 - 200khz  sensitivity: 5mv/div - 20v/div  sensitivity error: < 5%  resolution: 12-bit  input Impedance: 1M ohm  Maximum Input voltage: 50Vpk  Coupling: DC, GND  Trigger Modes: Auto, AC, Normal, Single  Trigger Types: Rising/falling edge  Trigger Position: 1/2 of buffer size fixed  Display: 2.

4 inch color tft lcd with 320 x 240 resolution  power supply: 9v dc 8 - 10v acceptable,  not included  dimension: 115mm x 75mm x 22mm  weight: 100 gram not including cables and power supply Package Contents:  DSO Shell Oscilloscope * 1 BNC-clip cable * 1 Users Manual * 1 Kindly note:  1. Package contains 5 pcs 9v Battery Clips 9V battery is not included.

Simplicity in structure and easiness in assembly. More applications: display and mcu are now mounted on the same board mainboard to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. It reaches 5mv/div -- 20v/div while DSO138 is only 10mV/div -- 5V/div.

Quimat Updated DSO Shell 2.4” TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 Assembled Finished Machine #ad - Quimat q15001 oscilloscope is an Assembled finished Machine. Kuman graphic multifunction tester: resistor + capacitor + diode + SCR + inductance + Transistor + mos tube. Automatic detect npn and pnp transistors, diode including dual diodes, capacitors, transistors, N-channel and P-channel MOSFET, resistors, thyristors and other components.

With function of automatic power off, can save unnecessary time and battery capacity, Automatic test the pin element and the display on the 12864 LCD Display.

More information about Quimat #ad


Similar products