Pentek CBC-20BB Carbon Block Filter Cartridge, 20″ x 4-5/8″, 0.5 Micron

#ad
#ad
Pentair Industries CBC20-BB #ad - Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. This pentek cbc-20bb carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential drinking water.

Initial pressure drop of 8. 5 psi at a flow rate of 4 gpm. Bonded pac media with polyolefin wraps and polyethylene netting. Protozoan cysts include Giardia, Entamoeba, Cryptosporidium, and Toxoplasma. The cartridge has an initial pressure drop of 8. 5 pounds per square inch psi at a flow rate of 4 gallons per minute gpm, and operates over a temperature range of 40 to 180 degrees F 4.

Pentek CBC-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 0.5 Micron #ad - 4 to 82. 2 degrees C. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. Nominal filtration rating of 05 micron. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

The nitrile butadiene rubber Buna-N gaskets seal the cartridge against the housing sold separately.

More information about Pentair Industries CBC20-BB #ad

Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8"

#ad
#ad
Pentair Industries GAC-10 #ad - Drop-in cartridge design allows for quick filter change on most standard 10 inch housings. Designed for maximum adsorption with post-filter to reduce carbon fines. The innovative post-filter reduces carbon fines before the water leaves the cartridge for cleaner, better tasting drinking water. The filter cartridge is manufactured to prevent channeling or bypass and maximize contact with the filter media.

The pentek-gac-10 cartridge provides effective reduction of chlorine and bad taste and odor from your drinking water. Ideal for general-purpose water filtration.

More information about Pentair Industries GAC-10 #ad


Similar products



Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron

#ad
#ad
Pentair Industries ChlorPlus-10 #ad - Reduces chlorine and chloramines in residential and commercial drinking water. The filter will reduce free available chlorine fac at 2 parts per million ppm by at least 75% in up to 50, 000 gallons at a flow rate of 1 gallon per minute gpm, and reduce 3 ppm chloramines by at least 75% in up to 1, 000 gallons at a flow rate of 1 gpm.

For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. It has nominal filtration rating of 1 micron at an efficiency of 85%. Initial pressure drop of 6 psi at a flow rate of 1 gpm. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 75%.

Pentek ChlorPlus 10 Carbon Block Filter Cartridge, 10" x 2-1/2", 1 Micron #ad - The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. The cartridge is made of bonded powdered activated carbon PAC media with a polyolefin core and shell and polyethylene outer netting. The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

More information about Pentair Industries ChlorPlus-10 #ad


Similar products



Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"

#ad
#ad
Pentair Industries DGD-2501 #ad - It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, commercial, and is used for treatment of residential, and municipal drinking water.

Specificationsnominal filtration rating pre-filter25 micronsNominal filtration rating post-filter1 micronInitial pressure drop at 10 gpm. The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges.

Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" #ad - This pentek dgd-2501 spun polypropylene filter cartridge reduces sand, silt, commercial, scale, and rust particles in residential, and municipal drinking water.

More information about Pentair Industries DGD-2501 #ad


Similar products



Pentek PD-5-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 5 Microns

#ad
#ad
Pentair Industries PD-1-934 #ad - This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications. SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm.

This pentek pd-5-934 polypropylene filter cartridge reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release.

Pentek PD-5-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 5 Microns #ad - It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C.

More information about Pentair Industries PD-1-934 #ad


Similar products



1M-4PK 1-Micron Sediment Water Filter Cartridge, 4-Pack

#ad
#ad
Ronaqua 1M-4PK #ad - Reduces chlorine and chloramines in residential and commercial drinking water. Nominal filtration rating of 1 micron. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. All filters are individually wrapped and sealed. All filters meet NSF Standards and Regulations. Temperature range of 40 to 145 degrees F 4.

4 to 62. 8 degrees C. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 5 microns. Filters will fit any Residential Reverse Osmosis Unit that features standard 10" filter housing. Temperature range of 40 to 125 degrees F 4.

1M-4PK 1-Micron Sediment Water Filter Cartridge, 4-Pack #ad - 4 to 51. 7 degrees C. Product description this is a 4 filters set for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with 10" housing. Initial pressure drop of 6 psi at a flow rate of 1 gpm. Dimensions: 10" x 2. 5".

More information about Ronaqua 1M-4PK #ad


Similar products



Pentek WS-10 Water Softener 10”Cartridge, 155319-43

#ad
#ad
Pentek WS-10 #ad - Maximum temperature of 100 degrees F 37. 8 degrees C. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 5 microns. The cartridge has a capacity of 750 grains, a recommended flow rate of 0

50 gallons per minute gpm, and a maximum operating temperature of 100 degrees F 37. 8 degrees C. Initial pressure drop of 6 psi at a flow rate of 1 gpm. Spun polypropylene for resistance to chemicals and bacteria. Recommended flow rate of 050 gpm. Nominal filtration rating of 1 micron. Dimensions: 10" x 2. 5". Bonded polypropylene microfiber for resistance to chemicals and bacteria.

Pentek WS-10 Water Softener 10”Cartridge, 155319-43 #ad - Cation, sodium-form resin ion-exchange media with polypropylene pre- and post-filters. It is made of sodium-based, non-solvent rinsed ion-exchange softening resin that meets Food and Drug Administration standards, and there are polypropylene pre- and post-filters to reduce the possibility of water bypassing the resin.

The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

More information about Pentek WS-10 #ad


Similar products



Omnipure CL10ROT33-B Inline Filter

#ad
#ad
Omnipure CL10ROT33-B #ad - Precisely manufactured to ensure the best possible fit with a reliable seal that won't leak. Bonded polypropylene microfiber for resistance to chemicals and bacteria. This filter cartridge has precisely cut threaded connections and is friction-welded together for a reliably leak-proof unit. The cl10rot33-b filter improves the taste and quality of water, pure and simple.

Spun polypropylene for resistance to chemicals and bacteria. Great filter for ice makers, refrigerators, beverage equipment and RO systems. This filter is wrapped and sealed and meets NSF Standards and Regulations. Initial pressure drop of 6 psi at a flow rate of 1 gpm. The superior engineering and production techniques of the Omnipure CL10ROT33-B inline water filter have made it an industry standard for over 30 years.

Omnipure CL10ROT33-B Inline Filter #ad - Reduces chlorine and chloramines in residential and commercial drinking water. Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. Capacity of 750 grains. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings. Cation, sodium-form resin ion-exchange media with polypropylene pre- and post-filters.

Temperature range of 40 to 145 degrees F 4.

More information about Omnipure CL10ROT33-B #ad


Similar products



Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge

#ad
#ad
Pentair Industries DGD-5005-20 #ad - It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.

Specificationsnominal filtration rating pre-filter50 micronsNominal filtration rating post-filter5 micronsInitial pressure drop at 20 gpm. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 20 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4.

Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge #ad - 4 to 62. 8 degrees C. This pentek dgd-5005-20 spun polypropylene filter cartridge reduces sand, commercial, and rust particles in residential, silt, scale, and municipal drinking water.

More information about Pentair Industries DGD-5005-20 #ad


Similar products



Pentek CC-10 Coconut Carbon Filter Cartridge, 9-3/4" x 2-7/8", 20 Micron

#ad
#ad
Pentair Industries CC-10 #ad - The filter media is made of coconut shell based granular activated carbon GAC for greater VOC reduction than standard GAC. The nitrile butadiene rubber Buna-N and Santoprene gaskets seal the cartridge against the housing sold separately. Spun polypropylene for resistance to chemicals and bacteria. Water filters are used in a wide range of applications, swimming pools, including drinking water purification, and irrigation, industrial processes, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. Bonded pac media with a polyolefin core and shell. 4-pack of standard 10" 1 Micron Sediment Filters. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

Pentek CC-10 Coconut Carbon Filter Cartridge, 9-3/4" x 2-7/8", 20 Micron #ad - Granular activated carbon filter reduces chlorine taste and odor and sediment as small as 5 microns. Dimensions: 10" x 2. 5". They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

It will reduce free available chlorine fac at 2 parts per million ppm by at least 75% in up to 7500 gallons at a flow rate of 1 gallon per minute gpm. Nominal filtration rating of 1 micron.

More information about Pentair Industries CC-10 #ad


Similar products



10" Sediment Water Filter For Any Standard RO Unit by Aquaboon 1, 4 Micron

#ad
#ad
Aquaboon AB(P)-4S1M #ad - Nominal filtration rating of 1 micron. Each cartridge is individually shrink-wrapped. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings. Made of thermally bonded 100% Pure POLYPROPYLENE Microfibers. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Outer zone-the large dusts are filtered in following layer to prolong the filter service life.

How it works? • innermost Zone - small dust is filtered in the following layer to ensure the good filtration efficiency. Universal industry Standard size of 10” by 2. 5” and is compatible with most standard RO Filter units. Recommended flow rate of 050 gpm. Compatible with reverse osmosis filter systems of brands: GE, Culligan, Kenmore, Omnifilter, Dupont, Whirlpool, etc.

10" Sediment Water Filter For Any Standard RO Unit by Aquaboon 1, 4 Micron #ad - X 2. 5 inch. Lifetime: replace two or three times a year, depending on the water quality. This filter is wrapped and sealed and meets NSF Standards and Regulations. Style: Dual Gradient.

More information about Aquaboon AB(P)-4S1M #ad


Similar products